The personnel shall fluent in English Language (oral & written), hold a recognized engineering degree and have a minimum three (3) years of experience the design of offshore and/or onshore pipeline in Pre-FEED or FEED or DED in oil and gas industry.

Candidates shall have a comprehensive knowledge of:

• Pipeline design (wall thickness, in-place strength, coating, joint connection and expansion)
• Material specification
• On bottom stability, free span, pipeline stress analysis, riser analysis and spool analysis
• Familiar in utilizing pipeline software: AUTOPIPE

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized engineering degree and have a minimum seven (7) years of experience in instrumentation design and control engineering for offshore and/or onshore in Pre-FEED or FEED or DED in oil and gas industry.

Candidate shall have a comprehensive knowledge of:

• Process control and measurement principles
• Design  and  installation  of  pneumatic  and  electronic  control  and/or  monitoring systems including DCS and SCADA systems
• Design and installation of fire and gas detection and protective systems
• Design and installation of instrument air distribution systems
• Study of facility and modification related to instrumentation systems
• Adequacy checks for instrumentation of existing facilities
• Familiar in operating software related instrumentation such as instrucalc, etc.
• Good communication skill to have coordination with other engineering disciplines and with Client
• Able to coordinate team (Engineer, Designer and Drafter)

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized engineering degree and have a minimum three (3) years of experience in instrumentation design and control engineering for offshore and/or onshore in Pre-FEED or FEED or DED in oil and gas industry.

Candidate shall have a comprehensive knowledge of:

• Process control and measurement principles
• Design  and  installation  of  pneumatic  and  electronic  control  and/or  monitoring systems including DCS and SCADA systems
• Design and installation of fire and gas detection and protective systems
• Design and installation of instrument air distribution systems
• Study of facility and modification related to instrumentation systems
• Adequacy checks for instrumentation of existing facilities
• Familiar in operating software related instrumentation such as instrucalc, etc.

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized engineering degree and have a minimum three (3) years of experience in piping design for offshore and/or onshore in Pre-FEED or FEED or DED in oil and gas industry.

Candidate shall have a comprehensive knowledge of:

• Relevant International Standards and Codes of Practice normally used in piping engineering in the Oil and Gas industry such as API, ANSI, ASME, etc.
• Experience in preparing Piping Specification and Datasheet
• Experience in performing Pipe Stress Analysis
• Experience in study of facility and modification related to piping engineering, including layout preparation
• Strong knowledge and familiar with software related to piping such as Caesar II

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized degree in Chemical engineering and have a minimum of seven (7) years process design engineering experience for offshore and onshore facilities in Pre-FEED or FEED or DED in oil and gas industry oil and gas industry.

Candidates shall have a comprehensive knowledge and experience in:

• Comprehensive knowledge of Relevant International Standards and Codes of Practice normally used in process engineering in the Oil and Gas industry such as API, ANSI, ASME, etc.
• Process simulation of physical fluid proper
• Steady state and dynamic computer simulation of the process (such as HYSYS, PIPESIM, PIPEPHASE, others).
• Developing process calculation, such as: line sizing, tank and separator sizing, pump sizing, PSV sizing and flare & vent sizing
• Performing process studies (e Hydrate, corrosion, blow down, radiation)
• Understand principles of Flow Assurance
• Good communication skill to have coordination with other engineering disciplines and with Client
• Able to coordinate team (Engineer, Designer and Drafter)

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized degree in Chemical engineering and have a minimum of three (3) years process design engineering experience for offshore and onshore facilities in Pre-FEED or FEED or DED in oil and gas industry oil and gas industry.

Candidates shall have a comprehensive knowledge and experience in:

• Comprehensive knowledge of Relevant International Standards and Codes of Practice normally used in process engineering in the Oil and Gas industry such as API, ANSI, ASME, etc.
• Process simulation of physical fluid proper
• Steady state computer simulation of the process (such as HYSYS, PIPESIM, PIPEPHASE, others).
• Developing process calculation, such as: line sizing, tank and separator sizing, pump sizing, PSV sizing and flare & vent sizing

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized degree in Electrical engineering and have a minimum of seven (7) years design engineering experience for offshore and onshore facilities in Pre-FEED or FEED or DED in oil and gas industry oil and gas industry.

Candidates shall have a comprehensive knowledge and experience in:

• Comprehensive knowledge of Relevant International Standards and Codes of Practice normally used in process engineering in the Oil and Gas industry such as API, ANSI, ASME, etc.
• Study of facility and modification related to electrical system.
• Performing load calculation (electrical equipment sizing), cable sizing, lighting calculation, lightning protection and grounding calculation
• Experienced in making single line diagrams, load list, etc.
• Familiar in operating software such as ETAP, Dialux, etc.
• Good communication skill to have coordination with other engineering disciplines and with Client
• Able to coordinate team (Engineer, Designer and Drafter)

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized degree in Electrical engineering and have a minimum of three (3) years design engineering experience for offshore and onshore facilities in Pre-FEED or FEED or DED in oil and gas industry oil and gas industry.

Candidates shall have a comprehensive knowledge and experience in:

• Comprehensive knowledge of Relevant International Standards and Codes of Practice normally used in process engineering in the Oil and Gas industry such as API, ANSI, ASME, etc.
• Study of facility and modification related to electrical system.
• Performing load calculation (electrical equipment sizing), cable sizing, lighting calculation, lightning protection and grounding calculation
• Experienced in making single line diagrams, load list, etc.
• Familiar in operating software such as ETAP, Dialux, etc.

The personnel shall fluent in Indonesian & English Language (oral & written), hold a recognized degree in Ocean/Civil Engineering and have a minimum of eight (8) years of experience in the design of offshore structures, including topsides, jackets, decks bridges, packaged units, etc. Having experience in FPSO design is preferred.

Candidates shall have a comprehensive knowledge of:

• Design and analysis in structural engineering
• Design and detail drawings
• Installation and lifting analysis
• Installation of jacket structures, piles, decks and modules.
• Weighing procedures and structure center of gravity calculations.
• Lifting equipment including offshore derrick barge cranes.
• Relevant International Standards and Codes of Practice normally used in the oil and gas industry including, but not limited to : API, BS, AISC, DNV
• Familiar in utilizing pipeline software: SACS, GRLWEAP, MOSES
• Good communication skill to have coordination with other engineering disciplines and with Client
• Able to coordinate team (Engineer, Designer and Drafter)

The personnel shall fluent in English Language (oral & written), hold a recognized degree and have a minimum three (3) years of experience in the design of offshore structures, including offshore installation of jackets and topsides, in Pre-FEED or FEED in oil and gas industry.

• Candidates shall have a comprehensive knowledge of:
• Design and analysis in structural engineering
• Design and detail drawings
• Installation of jacket structures, piles, topside decks and modules
• Weighing procedures and structure centre of gravity calculations
• Lifting equipment including offshore derrick barge cranes
•  Relevant International Standards and Codes of Practice normally used in the oil and gas industry including, but not limited to : API, BS, AISC, DNV
• Familiar in utilizing pipeline software: SACS

The personnel shall fluent in English Language (oral & written), hold a recognized engineering degree in Civil Engineering and have a minimum seven (7) years of experience the design of onshore facilities in Pre-FEED or FEED or DED in oil and gas industry.

Candidates shall have a comprehensive knowledge of:

• Civil calculation, such as: pile calculation, foundation calculation, structural calculation for both building and shelter, road and pavement, water intake, sewer and drainage, etc.
• Site preparation design, such as: cut and fill calculation, ground improvement
• Civil works, structural works and architectural works specification
• Prepare requirement for site survey and review and utilize site survey result, such as: soil investigation, soil resistivity, topography survey, etc.
• Familiar in utilizing civil software: STAADPro, Plaxis
• Good communication skill to have coordination with other engineering disciplines and with Client

Able to coordinate team (Engineer, Designer and Drafter)